Intermediate Work: Japanese Kites, Shelf, An Umbrella Stand, Floor Lamp

October 1st 2014 - October 5th 2014

Well, I need a little break from tiling.  There will be a lot more to do but while I was waiting for tiles to set, I would get these ideas and start navigating.  These are just ideas of how to complete the decoration of the house with objects that would make it even more unique.  While surfing, I came across a lot of miniature Japanese diorama and nearly all of them had scrolls and such decorating the walls.  But one artisan had kites! I had forgotten about Japanese kites! They are great for filling in wall areas.  So I found some images and printed them out.

Kite paper is very light and at first I thought I would use tissue wrapping paper.  But then I remembered I had some calligraphy paper which is also very light, transparent  and beige in color.  I don’t want my kites to look new.  So I had to tape the paper to another sheet so it would pass thru the inkjet printer without getting “eaten”.  Once that was done, I could start cutting and making the kites.

I used some left over pieces from the kit to make the supports for the back of the kites.  The koi fish kites (koinoburi) were made wrapping around a paint brush to maintain the wind sock kind of shape.  Basically these koi kites are used during the children’s festival in May and each koi represents a member of a family.  Black is the Dad, red the Mom and so on.  So I just made a family adding one blue and one green for a boy and a girl.  They are usually hung from a roof but I imagined mine hanging from a kite wand (seen on the internet if you want to buy one) from one of the porches.  Since the bamboo room is a more permanent type bedroom, I figured that could be the owner of the ryokan’s room.  Or someone with numerous family members.  Anyway, I chose the first floor porch for the koi kites.  It took a little time to cut them out, glue them and tie string to each one but I think the final effect is very cute.  They even look like they are hanging from a fishing rod.

Printed on calligraphy paper and gluing small supports.

Working on the koi fish kite.

Finished kites ready for some string and mounting.

Stringing the koi kites onto the rod support.

Kites hanging limp (no wind) outside the bamboo room.

Next up I wanted to make a shelf for the fire pit room.  I had more objects from Elisabeth Causeret that I wanted to put on display so I decided to make a shelf for them.  I had recently found another miniature site (mostly ship building materials in smaller scale) but since there were a lot of materials that could easily go with my 1/20 scale I ordered some things.  One was a walnut panel 3mm thick so this would be perfect for the shelf.  I used some of the walnut cleats I had purchased too (see below regarding the cleats) and shaped them as a false support under the shelf.  More decoration than anything.  Then I varnished it lightly to bring out the dark color.  I love walnut.  I then glued it in place (using some of the sticky wax to hold till the glue set).  I then had some other things I wanted to do in this room so I waited before loading up the shelf with its precious items.

On the left a sanded walnut cleat that I used as a shelf support.

Shelf in place and drying before adding objects to it.

Regarding the cleats, I bought them because I wanted to use them to hold the rope from the bamboo shades on the outside of the porches.  This way, the string is wrapped around those instead of just tied to the bannister.  I think they look cute and it cleans up the messy look on the front of the porches.

Gluing the cleat in place.

Wrapping the blind's rope round it.

Much cleaner look.

Old style umbrella stand.

My next project was an umbrella stand.  I found it in the pages that the kit provided for information about Japanese culture (lots of good pics and ideas here) and when I went online, I couldn’t easily find a pic of this old fashioned stand.  The umbrella stands now are not really stands at all but the usual cylindrical ceramic decorated ones that most businesses just leave at the door.  (Like the one I already installed in the front portico area.)  But I really liked this one and was going to give it a try.  At first I was convinced that I wouldn’t be able to use the walnut I just bought but then I figured “why not”

Basically I have problems with available tools.  The walnut is pretty hard to hand drill so I broke out my cordless drill.  There were some small bits so I measured out some circles and started drilling from small to large.  Obviously the last bit was still too small for the overall hole opening so I found some bits in my Dremel type hand tool that would plain out some of the wood and sand it down into a circular hole.  Still, the final sanding of the holes would have to be done by hand.  So I wrapped a paint brush with some sand paper and just sanded the holes. 

Plaining down the inside of the holes.

I then had to cut the side support pieces which was slow and also a bit imprecise.  One day I will invest in a mini table top vice.  Anyway, I cut the pieces then sanded the edges and did my best to match up the sizing.  I then glued the hole panel onto the side panels.  Next up was making the slots for the handles.  That was a chore.  I had to first use a saw then I had to chisel out a bit more as the umbrella’s toothpick size was a bit bigger than the slots.  After I could finally measure out and position the support piece onto the stand.  The bottom of the umbrellas (cocktail umbrellas by the way) would be resting on the support shelf.  So I had to trim back my handles a bit.  Then I painted them after matching them all up.  I had seen in the pics that in some inns they actually have rain gear that you can use so I chose my four umbrellas (orange) and tipped them with bright orange as well.  I managed to find in my files the kanji lettering for “First House” and traced it onto the umbrellas.  I then had to varnish the handles of the umbrellas and the stand obviously.  And that was that!! The umbrellas are now available for guests!

Staining and painting then varnishing the umbrellas.

Marking them for the ryokan.

Umbrellas in their stand.

And the stand set up in the foyer.

Tree branch by Dame NiSuru

And as the final intermediate project, I wanted to make another lamp but I wanted a floor lamp instead of a hanging lamp.  I had seen some nice shades on the internet and I liked the idea of a branch.
The firepit room has the giant tree beam running across the ceiling and the firepit itself lends itself to an outdoor kind of feeling.  So the tree branch decoration would look very nice in there. First I had to drill a hole in the back wall to accommodate another LED light which was done with some little difficulty.  I was eyeballing the hole and missed of course.  So that can be covered up in the back later.  I finally got the hole drilled in the right place and inserted the LED adding a little sticky wax to make it stay put in the position I wanted. 

Three stacked block for support from the inside.

The lamp construction was exactly the same method that I had used before only this time it had to be taller.  So I put three of the little blocks together to make the inside support for working on the lamp. 
I then found a nice black and white branch design (see above) and made a flipped version of it too.  I measured the blocks and how tall I wanted the design to be and printed it out on some of my shōji paper.  I touched up the design with some random branch extensions so the design didn’t seem too similar overall.  I then wrapped it round the blocks and found more leftover pieces to make the supports and side pieces as well as some little decorative pieces.  It wasn’t easy since my hands can’t handle such small pieces all the time but after a lot of patience and gluing, I got it done.  I then touched up the black areas and varnished it and placed it in its position.

Printed out on the shōji paper.

Wrapping around the blocks for support.

Finished lamp.

I think it came out really well.  I then put the ceramic objects onto the shelf and once lit, it lights up these as well.  You can see the cracklé in the ceramic! Gorgeous.

Check out the cracklé on the ceramics.  Really lovely! And the kites are on the wall!

I have one more object I want to place in this room but it will have to wait.  I must get back to tiling if I want to stay on schedule! And sorry for the long blog post.  I was feeling very creative this week!

Peeking thru the front doors to the foyer and my new umbrella stand.

Chapter 53 - Right Hand Room First Floor Ceiling, Sliding Windows to Front Porch, Floor Lamp

August 25th - 1st September 2012

I started straight off with the floor lamp thinking it was going to somewhat easy but I was so wrong!  Tiny little pieces and cutting out smaller pieces to size.  Gluing was a nightmare because the pieces were so tiny.  But I did pull it off in the end.  I also used a few extra pieces to make a little desk lamp which I will probably put in the bamboo room even if there is no light on the inside.  I have it in the foyer for now...it is cute there too.

Very small pieces....

...placement with tweezers then painted and varnished...

...glueing the supports to the paper.

Finished lantern.  Can't even fit a LED inside it's so small.

Extra pieces and paper.  You can see the kanji only when it's lit.

I then attached the sliding windows.  I glued and painted them then when I went to install them, I realised I had attached the upper sill with glue instead of double sided tape!!  It was not supposed to be installed permanently.  I nearly broke the wood trying to pry it off.  I had to touch up the paint on the outside since it got all scraped up during the attempt to pull of the piece.  In the end, I got the windows in (fitting one side by sanding down the previously glued area) and then just fitting the back piece.  I was so relieved I managed to get that piece off !!

Glueing the windows that then had to be stained.

1/4" double sided tape made quick work of attaching the window panes.

Placing the windows - view from inside.

Outside view.  You can see where I damaged the paint job a bit above the windows.

The last part of this chapter was the roof to the bamboo room.  As usual, the ceiling piece was warped and I had to try lots of different methods to remove the bow.  I got most of it out but it was a few days between wetting the wood, clamping it down etc.  Attaching the front wooden piece took some creative clamping too.  Then I just measured off the spaces and glued in the “beams” across the ceiling.  It was only half way because the tokonoma uses up part of the room.

Wetting the board and clamping it over a dowl to dry overnite.

Glueing the front wood section.  I had to clamp a smaller piece of wood to force the bow to glue onto the section. 

Measuring out the pencil line - just deocration.

Glueing on the "beams" that run across the ceiling.

Finished ceiling for the bamboo room.

At this point, I have been checking the upcoming chapters and they have me jumping around a bit.  I’d really like to complete the porch areas and attach them since I am afraid to leave them around unattached in my attic room - I know I’m eventually going to knock them on the floor or something.  So, I will be splitting chapters up into parts since some chapters cover completing parts of the porch and others continue into other sections of the build. We shall see how this kit shapes up in the end.