Additional Work: The Fire Wood and Tool Shed

 March 3rd - 5th, March 31st - April 3rd 2015

Around the time I was making the cabinet for the Buddha room, I was also beginning to build the wood shed.  I was doing it more or less to keep my mind (and hands) occupied as I was facing the imminent departure date at the end of the week to return to the states to visit my Mom.  Her health had worsened since my last visit and, in fact, this upcoming trip turned out to be the last.  She passed on the 11th March.  I am content to say that I was with her during her passing and I will sorely miss her voice.  As odd as it sounds, having lived far from her for so long, her voice is the one aspect that I remember most.  Gravelly yet always happy to receive my phone calls.  I miss her dearly.

So, upon my return home, I was happy that I had begun the little shed.  I was more focused and found finishing it and creating the woodpile that needed to be housed in it very therapeutic.  And so, here is what I did.

I managed to find a nice picture of a shed I liked.

Inspiration pic.

I also liked the roof structure the kit used to make the little sign stand.  So, again using lots of leftover pieces, I put the shed together.  I used some pieces of black card stock and the left over shingle sheets to make overlapping shingles on the roof piece. 

Making the roof supports.

Building the front.

Shingling the roof.

I then used my vinegar and rust stain to age the wood.  It’s pretty cool stuff as it ages the wood overnight.

Wood ageing

Next day and with the roof on.

Once dry, I got to work on cutting some branches into small logs.  I glued them onto a piece of wood so I can remove them as a whole if I want to change them one day.  I then added a little divider so that I could put a few buckets and garden utensils inside the shed.  I used a piece of sandpaper on that bottom of that side so I wouldn’t have to deal with the artificial grass or dirt under the shed.  I then pencilled in some nails and pierced each nail head with a needle to make them look more dimensional.   I also made a quick kindling basket (cutting up some coffee sticks to fill it).

Gluing the logs onto a base.

Fitting the logs inside the shed (divider in place).

Detail of "nails".

Finished shed with buckets, rake and basket of kindling.

The shed in place and the rake dirtied and aged. 

Of course I’m still not done with the back of the house.  More ideas and details to add to complete the backside of the house.  But I do love the little shed. 

Additional Work: The Cabinet for the Buddha Room

Inspiration for the cabinet

February 7th - March 1st 2015

I still have a few more things I had planned to add to the house so I tackled the the space in the buddha room that I wanted to fill.  I had looked at so many cabinets (some quite beautiful had they been the right scale) and I just couldn’t find anything adaptable.  But while navigating some photos, I came across this one. 
Realistically it is a very small cabinet but I liked the idea of the decoupaged calligraphy and the aging.  So, I gathered all kinds of left over wood

Construction.

and stock paper and went to work.
I measured out the size and found some of the printed off materials I had from the very beginning of the project.  The front drawers would be covered with scenes from an onsen and I liked the black and red motif.  So I used double sided tape and 1/4” masking tape to put the panels together to create the cabinet and drawers.  I just used the wooden cleats as handles and aged the entire cabinet using my usual old eye shadow colors.

Finished cabinet.

The final effect is quite nice.  Now I just want to find a few small objects to put on top of the cabinet! I am thinking still of the buddha theme.  But again, it needs to be very small.  I have a few ideas tho.....

Added to the buddha room.

The Dolls' House Magazine March 2015 Issue

February 6th 2015

Hello all!

Apologies for not having blogged in a while.  Full sized life took over for the past few months and I've been unable to partake in my mini hobby.  Not to say that the ryokan house is complete (I wonder if it ever will be) but it's without a doubt nearing the final phases.

As per the previous blog posts, I added the roof and made the ryokan sign which was the final chapter of the kit.  I still have a few things I want to build and add to the back of the house but I have only just returned from the States having spent some time with my Mom.  She was recently diagnosed with a terminal illness and has gone through all manner of hell just trying to maintain some semblance of normalcy.  I am very happy that I was able to spend time with her and my Dad and help them transition a little into their new reality.  The roller coaster isn't over yet.  And there will be many more painful moments.  I am sad I cannot be physically closer to them and my siblings.  It's not easy being so distant.  Wishing that someone had invented a Star Trek transporter.  Then I could split my time between my family in the States and my husband and son here.

In any case, I was contacted last November by The Dolls' House Magazine as they wanted to do a little photo op and write up on the ryokan house.  I have yet to see the magazine (perhaps it will arrive soon) but given that the Buddha Room actually made the cover I am hopeful that the write up and the photos did the ryokan justice.  I was actually really surprised that it made the cover.  I still see so many errors on the construction but I have to remind myself....it is the first time I've actually built a project of this kind.  I've learned so much! And it has been a fantastic journey.

I think I will be sad when it's finished...sitting up here in my cold attic room.  I can't move it anywhere else right now.  So the next project just won't be so big!! Of course I already have another project in mind.  I've been holding off so I wouldn't neglect the completion of the ryokan.  But I can see the day coming when I will tackle something new.  Hopefully it will be as challenging as this project has been.

Thanks all for following the construction and hope you will check out the magazine too!

As usual, onwards and upwards (because you can't go backwards).

Additional Work : Miso Barrels, Whisky Barrels, Soy Barrel, Water Barrels and Spa Barrels

November 21st - 26th 2014

When I purchased the walnut cleats from the Italian mini shop, I also purchased some small barrels that I wanted to use in the storage area of the kitchen.  I wanted the barrels to contain some things that were common use but also unique.  I found some pictures of some pretty cool barrels for miso (a kind of soy paste used in cooking) and a Japanese whisky (altho not the one that has been in the news recently).  It seems odd but this whisky brand has been around quite a while and perhaps the inn would have a barrel or two for their VIP guests.

First I found some labels that could be transferred to the barrels.  Next was finding the best medium for transferring them.  I printed the labels out on paper and a transparency both on the laser printer and the inkjet and set about making some tests.  All the tutorials I read required certain solvents (Citra Solv which I have no idea what that is and it’s not available in Italy, acetone, etc) or products like Modge Podge which are not available here either.  So in reading the tutorials on how to transfer, the only thing that stuck with me is what can dissolve the printer ink onto a porous surface.  I tried printing off my laser printer onto paper then placing the image on the wood and wetting the paper with acetone, then rubbing.  Wrong.  Not even one small bit of toner ink came off.  So that failed.  I then tried using the acetone on the surface and trying to transfer the toner ink from a transparency - nothing.  So my toner ink is pretty non soluble. 
Next was testing the inkjet on the transparency.

Printing on a transparency.

Clearly the ink is wet so you have to be super careful not to smear it (hence why I printed off many little images) but the size of my barrels are so small you really can’t see details once some of the ink transferred over.  I did discover it was best not to moisten the barrels as the ink just ran and clouded the image.  So, on the miso barrel, I finally got a few transfers to show up.  The soy sauce barrel was a total loss.  So I printed the page out again on calligraphy rice paper and attached the labels to the barrels with water and glue.  As the paper dries, you can see the printing through the paper a little.  Since I couldn’t see enough for the soy, I reprinted it on the other side (still with the toner ink) and then decoupaged it onto the barrel.  So, overall it was not a total loss.  In any case, all the tutorials about transferring images to wood are a bust for small pieces.  There just isn’t enough possibility to get good detail.

You can barely make out the label...

The miso label was a little better on a dry surface

Next was decorating the miso barrels.  One barrel has stones on top (found photos on the internet that showed how they press the fermenting paste by setting stones on the lid) and one of the barrels is open for use in the kitchen.  I used some acrylic paint to color a mix of glue and sand to create a paste-like mixture that I then spread onto the top of the barrel.  I made a small spatula and inserted it into the paste.  The final effect is quite cute.

Inspiration - miso barrell with stones on top.

Inspiration - Miso paste

My mini version of both.

Inspiration from Nikka Whisky

Finished barrels.

I then pulled out the changing room’s wardrobe so I could add some obijimi - obi belts - to the kimonos nestled there.  I just cut and glued some small colored ribbons.  Just a small detail that I wanted to add for a while and finally got round to it.

Adding the obijime.

Next I made a few buckets for the spa and water buckets for the irori fire pit room.  I also painted one bucket red to put into the Buddha room as a decoration.  Red sake buckets are given during wedding ceremonies so I thought maybe a bucket would be used up and then placed as a decoration in one of the rooms.  It’s cute and small.  So I was sold.  I painted “water” in kanji on two buckets which I filled with “water” (liquid Fimo) and baked for half an hour in a low oven.  I let them cool then finished aging them.  I then placed one in the irori room and one in the kitchen near the stove.  I then also placed the miso barrel in the kitchen and the whiskey and soy barrel in the storage area.  I think they look pretty good.

Water filled buckets for the spa.

The shower drain with a small bench.

Buckets filled and non filled for the spa.

Two fire fighting water buckets and the red used sake bucket.

Whisky, soy and miso barrels in the storage space.

Buckets placed in the spa.

Miso paste barrel in place and water bucket at the far right.

It’s now Christmas time as I write this (well, really the day before Thanksgiving) so all the manger accessories are out in the stores.  Often you can find a few little objects that work well in scale but you have to go within a day or two of the displays being put out because the cool objects disappear quickly.  Anyway, I found a set of tubs (buckets for a manger scale but for me they will be tubs) and cleaned them up a bit, painted them and varnished them.  I used a gold paint pen to trace a small band of “metal” round the outside.  I’m not quite sure what I will do with them yet but they are definitely going in the house. 

Manger buckets will become tubs in my house.

Anyway, real life is crashing down on me of late.  My next idea is for the back of the house but I have to plan it out and I’m not really concentrated right now.  So, perhaps after Thanksgiving (which I am going to celebrate on Sunday).

Happy Thanksgiving to all my family and friends and remember to appreciate your loved ones at least one day out of the year.  Eat turkey.  Be Happy!!

Super cute pie miniature you can find on Etsy.

Chapter 120 - Installing the Roof, Installing the Lanterns, The Ryokan Sign

November 18th - 19th 2014
Well, the final big step was installing the roof onto the house.  I checked before and noticed that the roof doesn’t lie perfectly flat on the top of the last floor so I applied large globs of glue in the four corners and positioned the roof on top.  I figured that the weight will hold it in place and the glue will stop it from sliding.  It would be very easy to remove if needed (perhaps for moving the house to a different location?) and then reattach.  I think it looks very super

Globs of glue....

Roof is on.  Looks crooked to me but that's me overcompensating....

I then attached the lanterns using the little hooks I had purchased.  I am glad I had already drilled the holes when I did as it would have been impossible to install these according to the kit instructions (with little nails).  I put a drop of glue on the end of each one and inserted them into their respective holes.  They also are super!

The tiny clips that would fit into the tiny drilled holes.

Lantern in place.

The last thing to put together from the kit (not counting also the last little armrests which I will eventually make) is the signage.  Lots of tiny pieces here and it took me a bit to put it together.  I aged it a bit with some black wash and left it to dry.  I’m going to leave it this way without varnishing it. 

Tiny bits and pieces.

Assembled signage.

Dirtied and in position.

And the build is complete.  What’s left are the little details and things I want to add to the kit that were not part of it.  I want to finish the back with some landscaping and more storage area stuff.  So, from now on, it’s Intermediate Work - which is really Additional Work.  Still, it’s pretty sad having completed the house from a building point of view.  It has been a challenge but also has kept my mind busy and occupied.  Here are some more pics:

Open house.

Left side porches and spa changing room.

Right side porches and kitchen.

Chapter 115, 116, 117, 118 & 119 - Tiling and Peak Finishing Decoration, Painting the Roof

Remaining areas left to be tiled.

November 12th - 17th 2014

I went back to tiling today.  Cutting, sanding and glueing.  Hardly exciting but needs to be done.  I am working on the back roof of the house now.  Lots of tiny pieces to insert into areas that I hope will be covered effectively later (well, not much later).  Anyway, I had to finish the back roof areas and then also finish off the last three corners of the peaks.  So since I had used some of the tiles previously for the front, I had to open chapter 117 to get more tiles to finish the back and corners.   I finished the last two left corners and while the glue was drying, I pulled out Chapter 116 and 118 which were the pieces to finish the top of the peaks of the left and right side roofs.

Nearly finished tiling.  Just one tiny corner spot left to be done.

Chapters 116 and 118 had these pieces for decorating the roof tops.

First off, I noticed in fact that I had to add a last row of tiles.  This was ok since I still had quite a few tiles to use.  I didn’t add the last row previously since I wasn’t sure if there were large or small filler pieces that would go between the last row of tiles and the top of the peak.  In fact, the space was much too large for the filler.  So I am now adding as I move along pieces to complete the top row of the tiling. 
Once the last row dried in place, I started adding the pieces that would support the upper peak decorative tiling.  It was necessary to use some pieces as filler and glue in place using fairly big globs.  Not only that, for the side peaks I made the mistake of thinking I could glue all the layers together and then place them on the roof.  Wrong.  The pieces are thin and notched to permit you to bend them into place and glue.  But since I had absolutely no way to hold the pieces in place (my little clamps had no where to “hold on” to) I was forced to hold them in place for a while or use big globs of glue and my weights  and just hope that gaps are not so visible from the front of the house.  So again, I lost time waiting for glue to dry.  But at least now I know how to proceed for the rest of the roof.

Two side pieces and the top added.

Creative weighing down to adhere to the curve of the roof.

The next day I finished tiling the last rows and filling gaps where the tiles needed cutting (thereby completing chapters 115 and 117).  I attached the last onigawara (not without difficulty - but I extended a tile in the last row of the right side to accommodate the underside of the onigawara better for attaching) and again waited for glue to dry.  In the meantime, I tested out an area using my black acrylic paint somewhat watered down.  The entire roof will have to be painted black to even out the surface somewhat so I tried an area.  Honestly the layer of black makes a big difference especially considering the amount of dust that accumulated on the tiles while working.  I have dusted them repeatedly but still there is a layer that I can’t remove (unless I wash them - which I am NOT going to do!!!) 

You can see the structure of the pieces to allow some bending.  Not much tho. 

Adding the corner support.  The front of this part of the roof has been painted.

I then attached more gable decorations at the back of the house (using one that came out lousy from the front) and attached some of the angled peak end decorations as well (from chapter 119).  Things are overlapping a bit since I am working while waiting for areas to dry.  Waiting for the front to dry, I finished the last corner to the right front roof, added the corner decoration and painted black under that gable.  Working this way, I moved ahead by rotating jobs.   Some of the things I screwed up on but for some reason the kit came with an abundance of pieces so I just ripped them off and started over. 

You can see the difference betwwen the painted tiles (right) and non.

Anyway, by Monday the 17th I was getting ready to add the last of the edging to cover where the tiles meet in the front.  I finished painting the whole roof and must say now the surface does look nice and even. 

Painting the roof.

Painting complete and adding the final covering pieces.

The final part was just adding the two decorative pieces to the back of the roof to hide the tile junctures, then the back left corner piece.  I had some extra decorative “gable pipes” so I cut them to size and glued them to the front tile cover pieces.  No need to waste extras.  And the roof is fu@king done!!! I cannot believe it!!  And it weighs a ton!

Detail of the corner, gable and juncture areas of the roof.

Finished roof.

Next chapter....attaching the damn thing!!!