Chapter 50 - Railings to the Left Porch Extension

May 30 - 31st 2012

It's in the details.

The parts were many and all for a series of railings for outside the porch.  Some pieces didn’t really fit all that well but being so tiny and with painting them then glossing them, you really can’t see much of a difference.

Again, I am convinced that the beauty of this kit is in the details.  They could have easily had a simple railing set up outside the windows but instead, they followed Japanese architecture and came up with railings with nice little curved details on the ends.  As time goes by, these chapters are becoming repetitive somewhat because they are more or less the same room structures or windows but adding in a color here and an adjustment there makes it more interesting. 

Left Porch completed.  Just need to attach it.

Looking forward to getting to the 2nd floor!  But first, we have to complete the right porch....

Chapter 49 - The Sills and Sliding Windows to the Left Porch Extension, the Kutsunugi-ishi

29 - 30th May 2012

I immediately put together and stained the sliding windows.  Since I had already done quite a few, they went together quickly.

The sills needed staining so while they dried, I put together the shoe cleaning stone or Kutsunugi-ishi.  I made this one with white stones instead of sand since I liked the look better.  Left it overnite for complete drying to be sure the stones would stay put.

I also managed to trim and rework the fern plant so that it would fit in the corner.  Now that it is there, I like it.  I had to unattached the ceiling and the bannister to fit it in (and reglue leaves that fell off again...) but overall it looks cute in the corner.  The finished landing looks pretty nice.

The reworked tree and the Kutsunugi-ishi on the right

The sills required some sanding and positioning but luckily, at least this set, went in no problem.  The top section of the sill was just penciled in lines to give the effect of an outdoor terrace floor.  The wooden beam-like detail underneath was a nice touch.  I am thinking of painting also these with white but will wait till I see the overall look.  I still have to install some kind of terrace railing out there.

The sliding door area needed aggressive sanding as I had predicted.  Since the bottom piece installed in the last chapter was a tight fit and didn’t slide all the way down.  So adjustment was made and the window sections finally slid into place. 

You can see the beam details under the terrace floor

With this chapter completed, I have actually finished one of two and half books that I made for the construction of the dollhouse.  As each edition of the kit arrived, I removed the instructions and made books of them.  That way, I was sure to know what came next.  It was a good thing too because I have noticed that some pages are mis-numbered.  I numbered the kit sets too to be sure I had them in order and could find the chapters while working.  I must say, my prep work saved me a lot of time and has pretty much sped up construction.

Chapter 48 - The Ceiling and the Sliding Windows to the Left Porch Extension, The Little Indoor Garden

May 24 - 28th 2012


Luckily, the ceiling fit perfectly into place.  The only problem was piece number 5 which was supposed to be flush on both sides and ended up needing sanding to remove a lip section which would have fit on the ceiling on the other side.  Just coaxing and it all fit together perfectly.  Piece 6 needed sanding to fit into place (bottom section of where the sliding windows would fit) since it was so tight.  When the top piece is fitted, it will need some extra sanding to be sure the windows slide smoothly. 

The first two of four windows was the usual also.  The plastic “glass” needed trimming since it was too large for the windows.  Painting and using the bi-adhesive tape does the trick for fitting the glass.

The little garden is supposed to be for the corner of the first floor landing but I have my wall painting there so I don’t think it will actually look good there.  It came with a little wooden base that needed whittling to make it appear to be a stone covered mound. 
The leaves were printed on green paper that needed to be cut out one by one.  I didn’t do them all together but over two nites.  I also decided to cut out a few yellow ones from construction paper because I figured I’d add those at the bottom like the plant was yellowing or loosing some of it’s leaves.  I also had to locate some florists tape.  I knew I had some in the house somewhere when we were doing classes in Biedermeier arrangements so after locating that, I was able to twist the wires and cover the ends with this tape.  I think it looks cleaner rather than just twisted wires.
Even if the instructions had you wait till the end to glue on the gravel and small stones, I figured it would be easier to do it now and also glue in tighter the wired trunks.  So, with that done, I then proceeded to attach all the little leaves. 

I glued the yellow ones towards the bottom then had to wait for the leaves to dry since it would have been dangerous to manipulate the trees while the leaves were still fragile.  A diluted hand of gloss varnish and the tree garden was completed.

Ceiling section, bottom of sliding windows, fern tree.

Chapter 47 - The Bannister to the First Floor Landing, The Shōji to Left Front Porch, The Telephone

May 20 - 24th 2012

Well, right off, the phone has already been put together so here is a little pic of it inside the phone booth.  As I had already written, I added the LED light in there to give it a kind of run down look inside the booth.  I think it came out great - also considering I almost lost some pieces...

The shōji was simple yet at the same time, when it comes time to install them into the runners, the paper backing creates some obstacle to smooth movement.  Next time, I will install the paper a little further up so they will slide easier for opening and closing.  There is no pic of this since the last chapter showed two out of the four installed.  Just the same thing.

The next project was the bannister and the floor landing from a  previous chapter.  That meant I had to properly install the 1st floor on top of the bottom to insure a good fit for the landing.  Working that out, the stairs wouldn’t fit so I had to dismantle them and start over.  Since, honestly, this bummed me out, I avoided it for a few days and decided to make a shamisen.  The reason was since I had navigated lots of sites and couldn’t find a decent mini shamisen in the right scale, I figured I’d just find some detailed pics and make my own.

I checked out the actual dimensions.  Lots of these sort of banjo-like instruments are made with snakeskin or worse yet, dog skin, but I found a nice pic of one that was a simple white skin.  So I used that.  I then downloaded and printed off a pic of kimono silk fabric to use as a decoration on the external part.  I think it is quite successful.  All the little pieces were just left overs or pieces I picked up from my friend’s Dad who is a huge 1:78 scale model builder (mostly ships and boats) but he has lots of materials left that he figures he’s never going to use so he gave me some.  Very generous indeed.

My inspiration for the Shamisen

Once I finished the shamisen, I had no more excuses so I had to attach the stairs again.  I repaired the unglued areas and managed to fit in as close as possible - just wasn’t going to fit perfectly.  Glued, braced and left overnite.  The instructions say not to actually join by glueing the two floors.  Just attach the stairs.  So I did.  The bannister had to be slightly unattached from the wall because I made my wall hanging there but I still think the area looks quite nice finished.

Miniature shamisen finished

And if you're interested, here is what a shamisen sounds like - a video of dueling Shamisen! Very cool.

Chapter 46 - Walls, Floor and Shōji to Left Front Porch Area

May 18 - 20th 2012

More painting and prepping.  The floor was the same as the other simulated hard wood floors.  Just measuring out and drawing straight lines across the wood, cutting with a utility knife vertically to simulate the floor junction, then just staining and varnishing it over to give it the wood floor look.  I decided to make the wood slats a little bigger than the vestibule and the first floor landing - like a different wood floor - just to give a little different look to the porch area.  The porch walls were easily installed and the most time consuming is always the window frames and shōji.  Just to glue them and make sure the glue takes before attaching the rice paper.  I had contemplated using some rice paper with a design on it but in the end, just for the first room, I am using the regular white paper.

Porch Area and first two of four shoji

Chapter 45 - Front Wall and Sliding Windows to Front Left Porch Area First Floor

May 16 - 17th 2012


The next chapter tackles the front porch area which will also be the hinged facade for the upper floors of the house.  These have been stylized into a sort of porch which will cover both the room and half of the first floor landing.  They will be independent of the bottom hinged roomboxes so you can open specific rooms for viewing.  Course, precise fitting will be necessary to be sure they will slide open without being hindered by the below floor’s roofing.  We shall see.

There was lots of painting and sanding for this one.  Once that was completed, I started putting together the window details (the ranma).  I had to weave a few thin pieces of cane which required some clamping and waiting till the superglue took. 



The rest of the wall was basically patient assembly following the instructions carefully since so many pieces were similar.  I had to custom fit a few pieces but nothing major since the final pieces fit in perfectly.  There were sections that they had as no glue areas but I decided to use some bi-adhesive just in case the areas became loose during additional installation of the porch area.

The ranma with woven canes

Part A of door/porch area is complete.  You can even see the wall hanging thru the clear windows.

How the door will eventually fit.

Chapter 44 - Wooden Overhang to Right Hand Room Entrance, Ceiling to First Floor Landing

May 13 - 15th 2012

Ikkyu Hell Maiden - Yoshitoshi

Before I put the ceiling on the landing area, I wanted to add a wall decoration to the back.  Mostly also because I think that the decoration in the kit is stuff I can use eventually in a garden space outside the house so I prefer to decorate the walls with objects for internal furnishings.  So, I made another Kakejiku.  This one just had a woodblock print on it with no religious meanings.  It’s from a Yoshitoshi series of prints.  He is one of my favorites as he treats life and death themes with a wonderful sense of humor.  I believe this one is called “Ikkyu Hell Maiden”.  Fun stuff.

Building the overhang and ceiling was pretty usual.  Of course, we will have to see how it fits with the rest of the staircase once that part of the build takes place.  The overhang had to be cut a lot to size because of the small decorative pieces that get inserted onto the roof.  Under there is a small bamboo support.  There were instructions to trim the inside edge but it seemed to fit fine to me so I didn’t end up trimming anything.  I left it overnite for a secure fit and then added the bamboo support.

The ceiling required the usual measuring and spacing and this time the stairwell slats were cut correctly so no re-cutting and fitting like the ceiling to the vestibule.  Just some slight sanding in the back part of the stairwell and the ceiling slid into place.  For now I’m not glueing it as it seems to sit snugly without glue.  I think it looks pretty successful already even before I add the staircase in there.  I realized tho that during the build the house is getting pretty dusty.  I bought a little USB vacuum and it works pretty good except the cord is a bit short.  Oh well, will have to figure out a way to vacuum the house somehow! I hate vacuuming my own house let alone a mini one.

The ceiling installed, the overhang on the right, the dimmed bulb in the booth.